Device details
Support sample-based customization. Please contact customer service
14-Head Filling & 12-Head Capping Machine
Monoblock Machine · Filling accuracy: ±3% · Filling speed: Depending on configuration
MACHPROOF
MP-119
MP-119
Fully automatic 14-head filling and lower cap 12-head screwing machineEquipment name
±3%Filling accuracy
Depending on the configurationFilling speed
Monoblock Machines
14-Head Filling & 12-Head Capping Machine
MP-119A monoblock with 14 filling heads and 12 capping heads on one rotary frame. It runs on electric drive only — no air compressor — which simplifies installation and removes compressed-air pulsing from the fill.
- Equipment nameFully automatic 14-head filling and lower cap 12-head screwing machine
- Filling accuracy±3%
- Filling speedDepending on the configuration
- Number of filling heads14 (customizable)
Final configuration is confirmed after a filling test with your material and container. Send the bottle, the cap and the product — we reply with a tested match and a quotation.
SPECIFICATION
Full technical data
Figures below are the catalogue values for this model. Anything marked “configured” or “customizable” is set from your sample during the test, and the final figures are written into the quotation.
| Equipment name | Fully automatic 14-head filling and lower cap 12-head screwing machine |
|---|---|
| Filling accuracy | ±3% |
| Filling speed | Depending on the configuration |
| Number of filling heads | 14 (customizable) |
| Operating mode | Pure electric, no air compressor required |
| Equipment material | combination of stainless steel and aluminum |
MACHINE DETAILS
Built detail by detail
Construction notes published for this model by the factory — control panel, filling and capping stations, guarding and finish. Send your container and we confirm the same build on a test run.
14-HEAD TURNTABLETRACKING FILLING MACHINE
12-HEAD TURNTABLE
TRACKING ROTARY CAP SCREWER
14-CHANNEL PERISTALTIC PUMP
APPLICATIONS
Where this model fits
Suitable products & containers
14 filling heads12 capping headsPure electricHigh outputNo air compressor
Container change means nozzle, rail and gripper change. Send your bottle or pouch and we re-test on it before you order.
Selection note
Built for high-output single-product runs. Because the drive is electric, torque and filling speed are set electronically, and the line does not need a compressor room.
CONTAINER REFERENCE
Packs this machine is tested with
Reference packs from the MachProof test library, showing the container families this model is set up for. Your own bottle, jar or pouch is run on the machine before the configuration is fixed.
NEXT STEP
Send us your bottle and your product.
We run a test on this machine type with your container and material, then send the video, the weighing record and a quotation with the exact configuration.